Instrumentation

Instrumentation valves

V41 – BAR STOCK NEEDLE VALVES FEMALExFEMALE THREADED

V42 – BAR STOCK NEEDLE VALVES MALExFEMALE THREADED

V43 – BAR STOCK NEEDLE VALVES MALExMALE THREADED

V51 – BAR STOCK GAUGE NEEDLE VALVE FEMALExFEMALE WITH BLEEDER

V511 – BAR STOCK GAUGE NEEDLE VALVE FEMALExFEMALE WITH DRAIN

V52 – BAR STOCK GAUGE NEEDLE VALVE MALExFEMALE WITH BLEEDER

V521 – BAR STOCK GAUGE NEEDLE VALVE FEMALExFEMALE WITH DRAIN

V522 – BAR STOCK GAUGE NEEDLE VALVE MALExMALE WITH DRAIN

V52M – BAR STOCK GAUGE NEEDLE VALVE MALExMALE WITH BLEEDER

V53 – BAR STOCK GAUGE NEEDLE VALVE MALExFEMALE ADJUSTABLE

V55 – BAR STOCK GAUGE NEEDLE VALVE MALExFEMALE WHIT MASTER GAGUE FLANGE

V58 – BAR STOCK GAUGE NEEDLE VALVE MALExFEMALE WITH TEST PORT

V59 – BAR STOCK NEEDLE VALVES COMPRESSION CONNECTIONS

V61 – BAR STOCK NEEDLE VALVES 90° FEMALExFEMALE THREADED

V62 – BAR STOCK NEEDLE VALVES 90° MALExFEMALE THREADED

V71 – BAR STOCK NEEDLE VALVES MULTIPORT MALExFEMALE THREADED

V72 – BAR STOCK NEEDLE VALVES MULTIPORT FEMALExFEMALE THREADED

Needle valves and gauge valves from I.T.E. s.r.l. are designed for use with any type of gas or liquid. These valves are constructed to withstand pressures up to 6,000 PSI and come equipped with a PTFE seal pack. For applications requiring higher pressure, models rated for 10,000 PSI are also available, and gaskets can be supplied in GRAPHOIL or other materials as needed. The valves can be manufactured with the most widely used industry connections.

I.T.E. offers extensive customization options to ensure the right solution for every application. To assist customers, several common options for end-use are available, such as:

All components in 316L
Special tests
Oxygen cleaning (Lox Cleaning)
Anti-tamper device on the valve
Locking system with a security padlock
Internal holes of 8 mm (on selected models)
Cryogenic version for low temperature applications (-190°C)
Fully customized products based on specific requirements

Valves can be supplied in the following materials:
AISI 316L, ASTM A105, ASTM LF2, DUPLEX – F51, SUPERDUPLEX – F55, ALLOY 400, ALLOY C276, ALLOY 625, and ALLOY 825. Other material options are available upon request to meet particular needs.

All manifolds are engineered to handle pressures up to 6,000 PSI and are equipped with PTFE seal packs as standard. Upon request, the manifolds can be supplied with seals made from GRAPHOIL or other materials, and models capable of withstanding up to 10,000 PSI are also available.

The manifolds are designed with threaded inlet and outlet connections, ensuring flexible installation at any location within a system.

When it comes to manifolds intended for differential pressure gauges, I.T.E. s.r.l. focuses on versatility to address a wide range of customer specifications. These manifolds are produced with center-to-center connection distances of 37mm, 50mm, and 54mm, and offer flexible options for inlet and outlet connections through a variety of specialized accessories.